2018 No Wakie 15′ Pontoon Boat, Triple Toon
PRICE REDUCED BY $1000 ON 8-3-2019
Honda 15 HP Four Stroke, Electric Start, Power Trim and Tilt
TRAC Electric Anchor with Remote Key FOB.
Single Axle Trailer
We use only marine grade plywood on our NoWakie decks. It consists of one 4×14 sheet and one 2×14 sheet of 3/4″ marine Fir plywood with no voids on the interior of the wood.
We rivot the deck to the aluminum framing desribed below
We wrap our vinyl flooring over the top and side of the deck. We then use silicone to seal the rub rail and handrail to prevent water from seeping into the wood through the topside of the deck where holes have been drilled for handrail and rubrail securing. The bottom side of the decking is left open and unsealed as per manufacturers instructions.
Handrails and Gates
Our handrails/gates are constructed of 3/4″ X 2″ HDPE pickets and gates that are routered to shape. They are held together with 1 5/8″ stainless steel screws to provide an incredibly durable and weather resistant rail that looks great and cleans easy as well.
Our pontoons are hand rolled from flat sheets of 3/16″ High Density Polyethylene (HDPE). We cap each end of the 4 foot tubes and weld eah tube together. This creates 17 individual, welded sealed chambers throughout the 3 pontoons. The nose of the pontoons are built with 1/4″ HDPE and have an additional 1/4″ thick HDPE cap on top of that for strength. Our pontoons are approximately 15 1/2″ in diameter.
We use 3/16″ angled aluminum for our support framing that we attach to 1″ HDPE saddles. These saddles are what attach the pontoons to the aluminum.
Our motor mount consists of a welded pontoon style aluminum mount with two pieces of Aqua Plas V. A fiberglass plastic material that is used in the marine industry.
· 6 people
· Maximum weight capacity of 1088.5 lbs (including motor and gear)
· Rated up to a 15 HP motor-long or short shaft.
· Weight 780 lbs (base model boat/handrail only)
· Deck size 6 x14 ft
· Length 15’4”
· Width 6’0”
· Handrail height Front 18 1/2” Rear 21 1/2”
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Sending your message. Please wait...
Thanks for your message! We'll get back to you shortly.
There was a problem sending your message. Please try again.
Please enter one valid email address.
Please complete all the fields in the form before sending.
Name Error. Use only alpha.
Message Error. Only Use only alpha and numbers.